Product Description And Specifications; Intended Use; Product Features; Noise/Vibration Information - Bosch GSB 24-2 Professional Originalbetriebsanleitung

OBJ_BUCH-3436-001.book Page 14 Wednesday, November 29, 2017 10:24 AM
14 | English
(ASTA approved to BS 1362). If the plug is not suitable for
your socket outlets, it should be cut off and an appropriate
plug fitted in its place by an authorised customer service
agent. The replacement plug should have the same fuse
rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
The rapid shut-off feature (Kickback Control) provides
better control over the power tool to increase user protec-
tion compared to power tools that do not have Kickback
Control. The power tool will switch off if it suddenly and
unforeseeably rotates around the drilling axis.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, un-
fold the graphics page for the machine and leave it open.

Intended Use

The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-1.
Typically the A-weighted noise levels of the product are: Sound pressure level 95 dB(A); Sound power level 106 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined
h
according to EN 60745:
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving without impact:
a
h
K
Tapping:
a
h
K
1 609 92A 46H | (29.11.17)

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 "Drilling/Impact Drilling" selector switch
3 Thumbwheel for electronic speed preselection
(GSB 21-2 RCT)
4 "Drilling/screwdriving" selector switch
(GSB 21-2 RCT)
5 Rotational direction switch
6 Lock-on button for On/Off switch
7 On/Off switch
8 Thumbwheel for speed preselection
9 Gear selector
10 Button for depth stop adjustment*
11 Auxiliary handle (insulated gripping surface)*
12 Depth stop*
13 Handle (insulated gripping surface)
14 Chuck key*
15 Key type drill chuck*
16 Screwdriver bit*
17 Universal bit holder*
18 Hex key **
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
3 601 ... A9C 0..
m/s2 5.6
2
m/s 1.5
2
m/s 14.6
2
m/s 1.8
2
m/s –
2
m/s –
2
m/s –
2
m/s –
A9C 5.. A9C 7..
A9C 6..
A9C 8..
A9C 9..
5.6 5.4
1.5 1.5
14.6 15.7
1.8 2.2
<2.5 <2.5
1.5 1.5
<2.5 <2.5
1.5 1.5
Bosch Power Tools