Product Description And Specifications - Bosch GBH Professional 240 Originalbetriebsanleitung

OBJ_BUCH-2460-003.book Page 14 Monday, April 24, 2017 10:03 AM
14 | English
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Quick change keyless chuck (GBH 240 F)
2 SDS-plus quick change chuck (GBH 240, GBH 240 F)
3 SDS-plus tool holder
Technical Data
Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05/2009
Rated speed
Tool holder
Spindle collar diameter
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 609 92A 3SE | (24.4.17)
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (GBH 240 F)
7 Rotational direction switch
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
11 Mode selector switch
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle (insulated gripping surface)
15 Handle (insulated gripping surface)
16 Securing screw for key type drill chuck*
17 Key type drill chuck*
18 SDS-plus adapter shank for drill chuck*
19 Drill chuck mounting (GBH 240 F)
20 Front sleeve of the quick change keyless chuck
(GBH 240 F)
21 Retaining ring of the quick change keyless chuck
(GBH 240 F)
22 Extraction sleeve of the dust extraction attachment*
23 Clamping screw for the dust extraction attachment*
24 Depth stop of the dust extraction attachment*
25 Telescopic pipe of the dust extraction attachment*
26 Wing bolt of the dust extraction attachment*
27 Guide pipe of the dust extraction attachment*
28 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GBH 240
3 611 B72 1..



–
W 790
-1
min 0–4200
J 2.7
-1
min 0–930
SDS-plus
mm 48.5
GBH 240 F
3 611 B73 0..




790
0–4200
2.7
0–930
SDS-plus
48.5
Bosch Power Tools