Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch PBH 3000-2 FRE Originalbetriebsanleitung

14 | English
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck
(2) SDS plus quick-change chuck
(3) SDS plus tool holder
(4) Dust protection cap
(5) Locking sleeve
1 609 92A 6JK | (25.03.2022)
(6) Locking ring for quick-change chuck
(7) Lock-on button for on/off switch
(8) On/off switch
(9) Speed preselection thumbwheel
(10) Rotational direction switch
(11) Release button for impact/mode selector switch
(12) Impact/mode selector switch
(13) Gear selector switch
(14) Release button for gear selector switch
(15) Button for depth stop adjustment
(16) Wing bolt of auxiliary handle
(17) Auxiliary handle (insulated gripping surface)
(18) Depth stop
(19) Handle (insulated gripping surface)
a)
(20) Keyed chuck
(21) SDS plus shank for drill chuck
(22) Drill chuck mounting
(23) Front sleeve
(24) Rear sleeve
(25) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Rotary hammer
Article number
Rated power input
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Rated speed
No-load speed
– First gear
– Second gear
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with hollow core
bit)
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
a)
a)
PBH 3000-2 FRE
3 603 C94 2..
W 750
-1
min 4000
J 2.8
-1
min 1100
-1
min 0–1450
-1
min 0–3000
SDS plus
mm 43
mm 26
mm 68
mm 13
mm 30
kg 3.5
Bosch Power Tools