English - Philips HD1302 Bedienungsanleitung

ENGLISH

6
Introduction
Thanks to its compact, lightweight design, this iron is ideal for quick
ironing jobs or for taking it along in its handy pouch when you are
travelling.
The iron can safely be used at all mains voltages (110-120V/220-240V),
as it is equipped with a voltage selector. If needed, suitable adapter
plugs are available from Philips dealers, service centres, hotel receptions
or hardware shops.
General description (fig. 1)
A Foldable handgrip
B Mains cord
C Dual voltage selector
D Temperature control
E Soleplate and button slot
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the dual voltage selector has been set to the local mains
voltage before you connect the appliance.
You can use a coin to adjust the voltage selector to the local mains
voltage.
It is advisable to always reset the selector to position 220/240
after use. This will prevent damage if the iron is inadvertently
connected to the wrong voltage.
Do not use the appliance if the plug, the cord or the appliance
itself shows visible damage or if the appliance has been dropped.
Check the cord regularly for possible damage.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.