Setting Of Additional Remote Controls; Remote Control Memory Clearing; Restore The Factory Mode - cherubini Garda RX Einstellanleitungen

SETTING OF ADDITIONAL REMOTE CONTROLS

Up to 15 remote controls can be set.
Tn: Already programmed remote control
Tx: Additional remote control
+
A B
Tn

REMOTE CONTROL MEMORY CLEARING

It is possible to delete singly all the memorized remote controls. When the last one is
deleted the motor initial condition is restored. The same applies to the single channels of
a multichannel remote control: just select the channel to cancel.
Tn: Remote control to be cleared
+
A B
Tn
Tn: Already programmed remote control
+
B C
Tn
The following settings are now in factory mode: direction of rotation, timeout and white
wire control mode.
B
Tn
A
Tn

RESTORE THE FACTORY MODE

+
B C
Tn
30
B
Tx (2 sec)
B
Tn (2 sec)
+
B C
Tn (4 sec)