Hitachi YUTAKI S80 series Bedienungsanleitung Seite 16

GENERAL DIMENSIONS

DHW tank installed beside the indoor unit - RWH-(4.0-6.0)(V)NFWE + DHWS(200/260)S-2.7H2E
Top view
Left side
Indoor unit
Service with this space is possible
but, for an easier servicing of some
components it is recommended to
let a space >500mm
6 PMML0340B rev.1 - 03/2016
(*2) Minimum distance for
piping connection back outlet
>500mm (Min. distance
for E-box removal)
Tank
Right side
(*1) Recommended distance
between indoor unit and tank
may vary from 0 to 200 mm
Mark Part name
1 Flexible water pipe (x4)
2 Extension cables
3 Extension cables
4 Extension cables
5 Gasket (x5)
Front view
Option 1
Indoor unit at the
left side of tank
Dimensions according to the unit (mm)
Unit
RWH + DHWS200S-2.7H2E
RWH + DHWS260S-2.7H2E
Remarks
For heating coil inlet and outlet connections of indoor unit
and DHW tank
For tank electric heater
For tank thermistor
For unit controller
Gaskets (x5) for each flexible water pipe end (+1 for spare)
Option 2
Indoor unit at the right
side of tank
Units in mm.
Dimension "a"
1980
2289