Before Use; Assembling The Product; Set-Up; Turning The Product On And Off - Silvercrest STV 50 A1 Bedienungs- Und Sicherheitshinweise

Fully unwind the mains cable du-
ring operation to prevent the ca-
ble from overheating or melting.
Avoid risk
of injury
Do not insert fingers or objects
into the product during use.
Never use the product near ex-
plosive or flammable substances.
Avoid the risk of
damage to property
This product is not intended for
operation with an external timer
switch or a separate remote con-
trol system.
Never place the product on hot
surfaces (i.e. hobs) or near sour-
ces of heat or open fires.
Only use OEM parts.
Do not hang or mount the product
on the ceiling or the wall.
Safety instructions / Before use / Set-up

Before use

Note: Remove all packaging material from the
product.

Assembling the product

A ttach the back half of the base
half of the base
7
is an audible click upon connection.
Note: On the back half of the base
will see a slot for the mains cable
that the mains cable
the mains cable
9
P lace the base onto the pedestal fan
5
(Fig. D / Ⅰ.). Make sure it is in a stable position.
Then, screw the base
fan by turning the supplied wing bolts
2
clockwise (Fig. D / Ⅱ.).
S elect a location.
P lug the mains plug
power socket. Your product is now ready to use.

Set-up

Turning the product on and off

S witch the power supply on by setting the rotary
switch and timer
11
S witch the power supply off by setting the rotary
switch and timer
11

Setting the fan speeds

T hree fan speeds let you choose how quickly
the product circulates air around the room:
• Level 1, weak: to change to this level press
Button 1 .
15
• Level 2, medium: to change to this level
press Button 2
• Level 3, strong: to change to this level
press Button 3
P ress the OFF button
speeds.
to the front
8
(Fig. C). Ensure that there
you
8
. Ensure
9
is placed in the slot for
4
.
2
onto the pedestal
5
10
into a properly installed
3
to the "ON" position.
to the "OFF" position.
.
13
.
12
to switch off the fan
16
GB/IE/NI/CY 9