Before Installation; Connecting The Water Hose To The Refrigerator; Water Filter; Attaching The Internal Filter Into The - Beko GN1306230ZDX Bedienungsanleitung

Installation

3.7.1 Before Installation

Make sure that you have everything necessary
to ensure proper installation before proceeding,
including:
Your product comes with an internal water filter for
use inside the fridge. Part number of the filter is
4918450200 and you can use this part number
when ordering replacement filters.
3.8 Connecting the water
hose to the refrigerator
1. Slip the union (B) onto the water hose (A).
2. Push the water hose downwards firmly to slip it
onto the water inlet valve (C).
3. Tighten the union (C) by hand to secure it onto
the water inlet valve.
C
Normally, you are not required to tighten
the union with a tool. However, you can use
a spanner or pliers to tighten the union if
there is a leakage.
3.9 Connecting the water line
to the water supply
Connect the water line to a water supply valve. If a
valve is not present or you are not sure, consult a
qualified plumber.

3.10 Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Attaching the internal
filter into the refrigerator
1. Pull the water filter cover slowly.
2. Remove the water filter bypass cover by turning
it downwards.
A
10 /37 EN
B
Refrigerator / User Manual
E
C
D