Description Of The Appliance; Special Requirements; Before First Use; Using Your Hood - Teka GF-T Montageanleitung Und Pflegehinweise

Description
of the Appliance
Your cooker hood is equipped with:
A Sliding three-speed extractor fan control
B Light switch, for illumination with or wit-
hout fan operation
C On/off pilot lamp
D Hob lighting, located behind the extrac-
tor panel
E Filter located below the extractor fan
intake. Easy-to-remove for cleaning
F Filter support frame
This hood is designed for the external venting
of gases.
D
E
4
B C A
D
F

Special Requirements

before First Use

Before connecting the hood to the electricity
mains, make sure that the mains voltage and
frequency correspond to the values indicated
on the rating label inside the hood.

Using your Hood

Fan motors

Select the desired extraction speed by sliding
the control switch on the hood's front panel.
The extractor fan has three speed settings
and an on/off pilot light, which lights up when
the fan is operating at any of these speeds.
Position 1:
Off
Position 2:
First
speed
Position 3:
Second
speed
Position 4:
Third
speed
(maximum)

Light switch

This is independent of the extractor fan motor,
thus allowing the hob lighting to be used irres-
pective of the extractor hood's operating status.
On
Off
5