Philips Cucina HR1566 Bedienungsanleitung Seite 8

ENGLISH
8
6 Press the holder release button and bring the mixer into
horizontal position so that the beaters or kneading hooks are
lowered into the ingredients (fig. 5).
7 Switch the mixer on.
For the right quantities and processing times, see the table below.
◗
Press the turbo button to mix more quickly or to increase the
speed during heavy jobs, e.g. kneading yeast dough.
◗
Press the spatula against the side of the bowl to mix the
ingredients more quickly and efficiently.
8 When you have finished mixing, set the control slide to 0 and
unplug the appliance.
9 Press the holder release button and tilt the holder with the mixer
on it backwards (fig. 6).
10 Push the control slide forward to the eject position to release
the beaters or kneading hooks and remove them from the mixer
(fig. 7).
11 The mixer can be removed from the holder when the holder is in
upright or horizontal position. Press the mixer release lever at
the rear end of the holder and lift the mixer off the holder (fig. 8).
12 Remove the bowl from the stand.
Mixing without the stand
1 Insert the beaters or kneading hooks into the mixer (follow the
procedure as described above at point 3).
2 Put the plug in the wall socket.
3 Lower the beaters or kneading hooks into the ingredients and
switch the mixer on.
Press the turbo button to mix more quickly or to increase the speed
during heavy jobs, e.g. kneading yeast dough.