Cleaning / Maintenance - Renfert EASY view 3D Kurzanleitung

Cleaning / Maintenance

The device does not contain any internal parts that require maintenance.
Wipe the housing, including the lighting, only with a slightly moistened cloth. Do not use disinfectant or cleaning
EN
agents or compressed air.
Clean monitor only with a dry cloth. Because of the natural product used, the desk pad may build an oily coat. It is
possible to wipe it off with a grease dissolving cleaning agent such as a commercially available dishwashing liquid.
CAUTION!
Risk of getting burned on hot lenses of the lighting!
Clean only when the unit is switched off and has cooled down.
Removing the cable from the cable duct / guiding it into the cable duct
See images at the end of this manual.
Spare parts
You can find components subject to wear and the spare parts on the spare part list in the
internet at www.renfert.com/p918.
Enter the following item number: 24000500.
The components excluded from the warranty (such as consumables or parts subject to
wear and tear) are marked on the spare part list.
Serial number and date of manufacturing are shown on the type plate of the unit.
Troubleshooting
Details can be found in the instructions for use in the internet.
Disposal Instructions
Within the European Union units with this symbol should not be disposed of in unsorted domestic waste.
For more information regarding proper disposal please apply at your local authorities.
Subject to alteration
- 6 -