Henry Schein HS Gebrauchsanweisung Seite 20

off, the visual alarm is still active. After the pause period is over,
the audio alarm is reactivated.
Set Alarm System to OFF in the menu to turn off the alarm. A
Pop-up dialog box will display to confirm alarm setting. See
details in 3.3.8.
Up Arrow Button
In the menu state, press the Up Arrow button to choose different
items, and increase the value of some parameters. Press it
repeatedly to make a parameter increase by more than one. Press
and hold this button for more than one second to repeat the
increment continuously.
Press this button in measurement state to enter the latest 10-minute
SpO or PR trend graph.
2
Down Arrow Button
In the menu state, pressing the Down Arrow button can choose
different items, and decrease the value of some parameters. Press
it repeatedly to make a parameter decrease by more than one.
Press and hold the button for more than one second to repeat the
decrement continuously.
Press this button in measurement state to enter the latest 10-minute
SpO and PR trend table.
2
Function Button
During the POST, the Function button is not available;
Press this button in normal measurement state to enter function
choice or setup menu;
In the menu state, this button is also used as the Enter button.
Choose one item in menu using the cursor button (the Up Arrow
button and the Down Arrow button), and press the Function
button to confirm, then increase or decrease the value using cursor
button.
When the oximeter is off, synchronously press the On/Off button
and the Function button for one second, the oximeter will enter
Data transfer state.
19