Anfängliche Systemeinrichtung Und Erstkonfiguration; Setting Up Your System; Idrac Configuration; Options To Set Up Idrac Ip Address - Dell EMC PowerEdge M640 Installations- Und Servicehandbuch

Setting up your system

Complete the following steps to set up your system:
Schritte
1. Unpack the system.
2. Remove the I/O connector cover from the system connectors.
VORSICHT: While installing the system, ensure that it is properly aligned with the slot on the enclosure to prevent
damage to the system connectors.
3. Install the system in the enclosure.
4. Turn on the enclosure.
ANMERKUNG: Wait for the chassis to initialize before you press the power button.
5. Press the power button on the system.
Alternatively, you can also turn on the system by using:
• The system iDRAC. For more information, see the
• The enclosure Chassis Management Controller (CMC), after the system iDRAC is configured on the CMC. For more information,
see the CMC User's Guide at

iDRAC configuration

The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the
overall availability of Dell systems. iDRAC alerts administrators about system issues and enables them to perform remote system
management. This reduces the need for physical access to the system.

Options to set up iDRAC IP address

To enable communication between your system and iDRAC, you must first configure the network settings based on your network
infrastructure.
ANMERKUNG: For static IP configuration, you must request for it at the time of purchase.
This option is set to DHCP by Default. You can set up the IP address by using one of the following interfaces:
Interfaces Document/Section
iDRAC Settings Dell Integrated Dell Remote Access Controller User's Guide at
utility
Dell Deployment Dell Deployment Toolkit User's Guide at
Toolkit
Dell Lifecycle Dell Lifecycle Controller User's Guide at
Controller
CMC Web Dell Chassis Management Controller Firmware User's Guide at
interface Management Controllers
iDRAC Direct See Dell Integrated Dell Remote Access Controller User's Guide at
Anfängliche Systemeinrichtung und
Log in to iDRAC
www.dell.com/openmanagemanuals
Erstkonfiguration
section.
> Chassis Management Controllers
www.dell.com/poweredgemanuals
www.dell.com/openmanagemanuals
www.dell.com/poweredgemanuals
www.dell.com/openmanagemanuals
www.dell.com/poweredgemanuals
Anfängliche Systemeinrichtung und Erstkonfiguration
> OpenManage Deployment Toolkit
> Chassis
4
21