Note: You must reset it to the factory setting first (press reset button
for 5 seconds), If you have done some settings before.
Prepare: Wireless Network Connection
®
(Windows
7/8/8.1/10)
If you want to install the wireless network repeater, please make sure
your wifi is ON, and your network cable has been detached.
To operate, please follow the steps below to connect to the product:
1. Click Start→Control Panel→Network→Sharing Center→Change
Adapter Settings, right-click Wireless Network Connect, select
Connect/Disconnect.
2. Click Refresh Button, select the SSID default is "WIRELESS" then click
Connect.