For Your Safety - Stihl ATZ 150 Gebrauchsanleitung

The ATZ 150 converts the GHE 250 and
GHE 260 garden shredders into chippers
by replacing the feed chute and cutting
system. They can then be used to shred
thicker branch material in particular.
0.1 General
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
STIHL is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual may describe
models that are not available in all
countries.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
0478 903 9905 A - EN
1. Table of contents

For your safety

Standard equipment
Assembly
Removing the feed chute
Locking the blade disc
Removing the blade set
Installing the ATZ 150
Installing the feed chute
Notes on working with the
machine
What material can be processed?
What material cannot be
processed?
Maximum branch diameter
Maintenance
Blade maintenance
Reversing the blades
Standard spare parts
Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.
2. For your safety
Observe the instruction manual for the
7
shredder, particularly the "For your safety"
7
and "Maintenance" sections. The
8
instructions for blade maintenance must
8
always be observed.
8
Remove the mains plug before performing
8
any work on the machine.
8
Before each use, perform a visual check to
8
ensure that the funnel, blade and blade
fastening are in good condition.
8
Only use the cutting system in conjunction
8
with the appropriate funnel.
Risk of death from suffocation!
8
Packaging material is not a toy -
8
danger of suffocation! Keep
9 packaging material away from
children.
9
9
9
3. Standard equipment
Item Designation
A Feed chute
B Blade fastening screw
C Retaining washer
D Clamping ring
E Wing blade
F Blade disc
Instruction manual
1
Qty.
1
1
1
1
1
1
1
7