Cleaning The Transducer; Servicing; Product Lifetime - CareFusion Micro I Bedienungsanleitung

Cleaning the Transducer

The transducer requires no routine maintenance or servicing.
To sterilise or clean the transducer it may be removed by means of
the following procedure:
4
Remove the transducer by gently rotating the transducer anti-
clockwise and then pulling from the main body.
5 The transducer may now be immersed in warm soapy water
for routine cleaning or immersed in cold sterilising solutions
e.g. Perasafe for a period not exceeding 10 minutes.
(Alcohol and chloride solutions should be avoided.) After
cleaning/sterilising, the transducer should be rinsed in distilled
water and dried. Perasafe is available from CareFusion in
convenient 81g plastic bottles, Cat No.
36-SSC5000A.
6 Re-assemble the transducer into the Micro I.
CAUTION: Do not attempt to wash or immerse the spirometer or
accessories in water or cleaning fluid, as there are electronic
components inside that will be permanently damaged.

Servicing

If your unit requires service or repair please see page 294 for contact
details.
There are no user serviceable parts in the Micro I.

Product Lifetime

The Micro I meter is designed for a product lifetime of 5 years.
75