Transport, Packaging And Storage - WIKA 232.50.100 Betriebsanleitung

4. Design and function / 5. Transport, packaging ...
In addition, the enclosing and the pressurised components of
„
models 23x.30, 26x.30 and 23x.36 also meet the requirements of
this standard, relating to safety pressure gauges with a solid baffle
wall (code S3).
Scope of delivery
Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check pressure gauge for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage
Storage temperature: -40 ... +70 °C
„
WIKA operating instructions pressure gauge model 2 per ATEX
GB
11