Convenient Functions; Computer Connection Via Usb; Installing The Usb Driver; Using Digital Audio Workstations (Daw) - Boss ME-25 Bedienungsanleitung

Computer Connection Via USB

Connecting the unit to a computer enables you to manage the sounds on the ME-25 or to use a digital audio workstation (DAW) to record,
play back, and edit audio.

Installing the USB Driver

By using the dedicated driver, you can record, play back, and edit audio with high-quality sound and stable timing, and control the ME-25
using MIDI.
You can download the ME-25 driver from the Roland local website (http://www.roland.com/).
You must install the driver before you make USB connections.
The program and procedures for installing the driver may vary according to your operating environment; carefully read the Readme
included in the downloaded file.

Using Digital Audio Workstations (DAW)

You can use the ME-25 as an audio interface to the DAW via USB.
Adjust the volume using
the software

Use your computer's software to adjust the level of the signal input via USB (it cannot be adjusted on the ME-25 itself).
To adjust the volume of a guitar, use the expression pedal or adjust other volume related parameters.

To monitor the sound being input, first lower the volume all the way using your computer's software. Then, gradually raise the level until you've
obtained the amount of volume you want.

When the ME-25 is connected to a computer, the built-in guitar amp simulator is switched on.

The signal that is input via AUX IN is not output using USB.
Sending and receiving
audio signals

Convenient Functions

11