Convenient Functions; Tuning The Guitar (Tuner) - Boss ME-25 Bedienungsanleitung

Convenient Functions

Tuning the Guitar (Tuner)

1,2
1.
Press the MEMORY
time.
The tuner is switched on.
2.
If necessary, adjust the reference pitch.
You can change the reference pitch by holding down [EXIT]
and pressing the MEMORY
Display Pitch
35–45 435–445 [Hz]

The reference pitch setting is saved automatically, so there is no need
to make this setting each time you tune.

The reference pitch was set to 40 (440 Hz) when the unit was shipped
from the factory.
3.
Play a single open note on the string to be
tuned.
The name of the note closest to the current pitch of the string
played appears in the display.
(C) ( sign)
(F) (G)
/ pedals at the same
/ pedals.
(D) (E)
(A) (B)
4.
Tune so that the desired pitch is displayed
and both tuning guide indicators light up.
Tuning Guide
Too low
(rapid flashing)
5.
Press the MEMORY
time.
The tuner is switched off.
Bypass Feature (BYPASS)
In Tuner mode, the sound output is the same as the input
sound, with no effects applied (bypass).
You can use the expression pedal to control the volume.
Too high
Tuned
(rapid flashing)
/ pedals at the same
9