Herunterladen Inhalt Inhalt Diese Seite drucken

Let's Play - Boss ME-25 Bedienungsanleitung

Guitar multiple effects
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17

Let's Play!

Once you've finished making the connections, try playing sounds as you operate the ME-25.
Choosing a Sound (Memory)
Switches to the previous memory.
Switches to the next memory.
Depressing and holding the pedal lets you switch memories
successively.
Depressing the two pedals at the same time activates the
tuner function.
What is a Memory?
A group of effect settings is called a "memory. "
The ME-25 has 60 memories.
Display
The currently
selected sound
(memory) and
other information
appears here.
Switching to Solo Sounds
This switches to sounds suited to solo performance.
Pressing this pedal switches SOLO on and makes
the pedal's indicator light up.
Turn the VOLUME knob while SOLO is on to set the desired solo
volume.
* Cannot be adjusted while in Edit mode (p. 5).
Phrase Loop Play
Pressing this pedal for two seconds or longer enables
the Phrase Loop feature.
"Phrase Loop Play" (p. 10)
Should you encounter unexpected results, such as no sound being produced, check the following.
Are connections to other devices correctly made?
Check the connections once more.
Is the volume turned down?
Check the volume levels on any connected amp or mixer.
Has the level been lowered with the expression pedal?
When the expression pedal is set to control volume, sounds are not output when the toe of the pedal is in the raised position.
Using Pedal Effects
You can use pedal effects to apply wah or a variety of other
pedal effects.
To assign the pedal's function, firmly press the toe of the pedal
to toggle the PEDAL FX indicator's status.
PEDAL FX Indicator
Unlit:
Lit:
For detailed information about pedal effects, read "PEDAL FX (Pedal
Effects)" (p. 8).
Adjusting the Volume and Tone Quality
DRIVE Knob
This adjusts the amount of distortion of preamp distortion.
TONE Knob
This adjusts the tone quality of the preamp.
VOLUME Knob
This adjusts the volume level of the preamp.
The knobs will be disabled when the preamp is off. To check the on/off
status of the preamp, go to the Edit mode (p. 5).
You can save the settings you've adjusted.
"Saving Sounds (Memory Write)" (p. 4)
The pedal controls the volume.
The pedal controls the pedal effects.
Using Super Stack
This lets you get the powerful
sound of a large, stack-type
tube amp even when you're
playing with a small-size amp.
Pressing this button switches
on Super Stack and makes the
SUPER STACK indicator light up.
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis