Herunterladen Diese Seite drucken

Product Description And Specifications; Intended Use; Product Features - Bosch GLL 3-80 C Professional Originalbetriebsanleitung

Linienlaser
Vorschau ausblenden Andere Handbücher für GLL 3-80 C Professional:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Do not attempt to recharge the button cell and do not
u
short circuit the button cell. The button cell may leak,
explode, catch fire and cause personal injury.
Remove and dispose of drained button cells correctly.
u
Drained button cells may leak and damage the product or
cause personal injury.
Do not overheat the button cell or throw it into fire.
u
The button cell may leak, explode, catch fire and cause
personal injury.
Do not damage the button cell and or take the button
u
cell apart. The button cell may leak, explode, catch fire
and cause personal injury.
Do not allow damaged button cells to come into con-
u
tact with water. Leaking lithium may mix with water to
create hydrogen, which could cause a fire, an explosion,
or personal injury.
Do not use the measuring tool if the button cell holder
u
(22) does not close. Remove the button cell and have it
repaired.
Remove the rechargeable battery/non-rechargeable
u
batteries from the measuring tool before carrying out
work on the measuring tool (e.g. assembly, mainten-
ance, etc.). The battery/batteries should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
In case of damage and improper use of the battery, va-
u
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
When the battery is not in use, keep it away from pa-
u
per clips, coins, keys, nails, screws or other small
metal objects that could make a connection from one
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
If used incorrectly, liquid may be ejected from the bat-
u
tery; avoid contact. If contact accidentally occurs,
rinse off with water. If the liquid comes into contact
with your eyes, seek additional medical attention. Li-
quid ejected from the battery may cause irritation or
burns.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Recharge only with the charger specified by the manu-
u
facturer. A charger that is suitable for one type of bat-
Bosch Power Tools
tery pack may create a risk of fire when used with another
battery pack.
Caution! When using the measuring tool with
u
Bluetooth®, a fault may occur in other devices and sys-
tems, aeroplanes and medical devices (e.g. pace-
makers, hearing aids). Also, damage to people and an-
imals in the immediate vicinity cannot be completely
excluded. Do not use the measuring tool with
Bluetooth® in the vicinity of medical devices, petrol
stations, chemical plants, areas with a potentially ex-
plosive atmosphere and in blasting areas. Do not use
the measuring tool with Bluetooth® on aeroplanes.
Avoid using the product near your body for extended
periods.
The Bluetooth
word mark and logos are registered trade-
®
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) State of charge of rechargeable battery/non-re-
chargeable batteries
(3) CAL guard indicator
(4) "Working without automatic levelling" indicator
(5) Receiver mode button
(6) Receiver mode indicator
(7) Button for laser operating mode
(8) Bluetooth® connection indicator
(9) Bluetooth® button
(10) Battery bay
(11) Battery adapter cover
A)
(12) Non-rechargeable batteries
(13) Rechargeable battery/battery adapter release
button
A)
(14) Battery adapter sealing cap
(15) Rechargeable battery
A)
(16) On/off switch
(17) 1/4" tripod mount
English | 17
A)
A)
1 609 92A 4F2 | (06.06.2018)

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

Gll 3-80 cg professional