RECARO C 6000 Einbauanleitung Seite 50

P
1
1. Attach the air hose (1) with adhesive tape to the vehicle air duct (2).
Q
3
2. Feed the air hose (2) through the circular opening in the adapter (3).
3. Tightly screw the adapter (3) to the vehicle floor with the four original screws (1) removed earlier
using an appropriate screw locking device (not included in the installation kit).
Take note of the markings!
Torque:
Important note:
During the installation of the adapter ensure that neither the cable nor the air lines become
squashed or trapped.
If you have to move the adapter in the tunnel direction in order to screw it in place, press the air
hose gently together so that you can tighten the screws.
RECARO Automotive Seating
M10 screws: 45 Nm ± 2 Nm
1 Air hose
2 Vehicle air duct
2
R0250
1 Original M10 screws
2 Air hose
3 Adapter
2
Page 19