RECARO C 6000 Einbauanleitung Seite 44

F
11. Tip the seat carefully in the direction of the vehicle's tunnel.
12. Disconnect the electrical seat connection from the plug (1).
13. Remove the electrical plug (1) from the console.
14. Undo the seat's air connection (2).
15. Carefully lift the seat out of the vehicle and place it next to the vehicle.
Caution:
Please note that the seat can weigh up to 50 kg. Use lifting or carrying equipment if you need to.
Ensure that the seat is not damaged by the lifting or carrying equipment.
G
3
2
16. Disconnect the plug (2) for the control unit (1) and then remove the control unit.
17. Loosen and remove the two screws (3) in the control unit's connection bush.
RECARO Automotive Seating
1 Electrical connection
2 Air connection
1 Control unit
2 Control unit plug
3 Connecting bush screws
1
R0242
Page 13