Only use the appliance in-
■
doors. Do not use in wet
rooms or in the rain.
Do not operate or continue
■
to operate the appliance if
it shows visible signs of
–
damage, e.g. the power
cord is defective.
it starts smoking or there
–
is a smell of burning.
it makes unusual sounds.
–
In such cases, remove the
mains plug and contact our
Service department (see
"Advice, order and com-
plaint" on page EN-34).
The appliance corresponds
■
to protection class 1 and
may only be plugged into
a socket with a properly in-
stalled protective conduc-
tor. Connecting the device
to a socket strip or mul-
ti-plug is not permitted, and
can potentially result in fire.
Only connect the appli-
■
ance to an easily accessi-
ble socket so that you can
quickly disconnect it from
the mains in the event of a
fault.
Lay out the mains cable in
■
such a way that it does not
become a trip hazard.
Keep the appliance, mains
■
plug and mains cord away
from naked flames and hot
surfaces.
Do not kink or pinch the
■
mains cable or lay it over
sharp edges. This can result
in a break in the cable.
If the mains cable of the
■
appliance is damaged, it
must be replaced by the
manufacturer, through the
customer service depart-
ment or by a qualified spe-
cialist.
Do not operate the appli-
■
ance with an external timer
or a separate remote con-
trol system.
If the mains plug is no
■
longer accessible after in-
stallation, an all-pole dis-
connecting device com-
plying with overvoltage
category III must be con-
EN-7