Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal; Technical Data - Dräger X-pid 9000 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für X-pid 9000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
8

Disposal

This product must not be disposed of as household waste. This is indi-
cated by the adjacent symbol.
You can return this product to Dräger free of charge. For information
please contact the national marketing organizations or Dräger.
9

Technical data

Excerpt: See the technical manual for details
Ambient conditions:
During operation
-10 to +35 °C
700 to 1300 hPa
10 to 90% (up to 95% short-term) rel. hum.
Orientation
any
Degree of protection
IP 54
The gas inlet openings and gas outlet opening
must be protected against liquids and contami-
nation.
The water and dust filter must always be fitted
during operation.
Operational readiness:
The operational readiness consists of various phases, some of which run
simultaneously. Operational readiness is typically given after 10 minutes, as
the heat-up phase and temperature stabilisation are complete before the end
of the start-up phase.
Dräger X-pid
®
9000/9500 Sensor Unit
Start-up phase
10 minutes
Used to stabilise the sensors and includes a
flushing phase at the end. After 10 minutes, the
start-up phase, incl. flushing phase, will be com-
pleted. The start-up phase runs automatically
after turning on the sensor unit.
Flushing phase
Typically 45 to 80 seconds
Used for flushing the gas chromatograph
between measurements, during the start-up
phase and after standby mode.
Heat-up phase
Typically 3 to 4 minutes
Used to bring a cold device to operating tem-
perature, and runs automatically after the sen-
sor unit is turned on and simultaneously with the
start-up phase.
Temperature stabilisation
Typically 2 to 3 minutes
Used to stabilise the operating temperature if it
was previously too low or too high (e.g. after the
heat-up phase).
Operating time
Typically 8 hours under normal conditions. The
operating time reduces at low temperatures.
Dimensions
approx. 132 x 281 x 56 mm (W x H x D)
Weight
approx. 880 g
Disposal

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

X-pid 9500

Inhaltsverzeichnis