Herunterladen Inhalt Inhalt Diese Seite drucken

Halterung Für Gehhilfe; Einhandbedienung - HASE Bikes Trets Reg Gebrauchsanleitung

Behinderungsgerechtes dreirad mit fußpedalantrieb
Inhaltsverzeichnis

Werbung

SPECIAL NEEDS
Halterung für Gehhilfe
Verwendung
Für Personen, die eine Gehhilfe mit sich führen.
Merkmale
Die Gehhilfe kann bequem mit einer Hand in einen Köcher
(1) und mit dem Stockhalter (2) gesichert werden.
Montage und Einstellung
Die Halterungen können an Rohre mit einem Durchmesser
von 15 bis 60 mm montiert werden.
1. Legen Sie das Spannband (3) um das Rohr am Fahrzeug,
stecken Sie das Ende durch den Schlitz im Spannstück (4),
ziehen Sie es straff und biegen Sie es um. Kürzen Sie das
Spannband auf ca. 10 mm.
2. Stecken Sie den Sockel (5) auf das Spannstück (4).
3. Pressen Sie die Klemmscheibe (6) mit der Verzahnung
durch die Bohrung im Köcher (1) bzw. Stockhalter (2).
4. Stecken Sie den Köcher (1) bzw. Stockhalter (2) mit der
Klemmscheibe (6) auf den Sockel (5) und schrauben Sie
ihn mit der Schraube (7) handfest an.
5. Richten Sie den Köcher (1) bzw. den Stockhalter (2) aus
und schrauben Sie ihn mit der Schraube (7) fest.

Einhandbedienung

Verwendung
Für Schlaganfall- oder halbseitig gelähmte Personen.
Merkmale
Zwei unabhängige Bremssysteme mit zwei Bremsgriffen sind
an einem Lenkerende angebracht. Somit wird Lenken und
Bremsen mit einer Hand möglich. In Deutschland sind zwei
unabhängige Bremssysteme vorgeschrieben.
Trets Reh 3/12a-D-ENG
4
5
6
2
7
1
2
1
3
1
4
Holder for Walking Sticks
3
Intended Application
For people who use a walking aid.
Features
One hand is all the rider needs to place the walking stick in
the cup (1) and fasten it using the stick holder (2).
Assembly and Adjustment
The holders could be mounted to tubes with 15 bis 60 mm in
diameter.
1. Place the strap (3) around the tube, lay the end of the
strap trough the slot of the tension plate (4) and band it.
Cut it 10 mm after the tension plate (4).
2. Put the socket (5) on the tension plate (4).
3. Press the clamp plate (6) through the hole in the cup (1)
or the stick holder (2).
4. Put the cup (1) or the stick holder (2) with the clamp
plate (6) to the the socket (5) and tighten the bolt (7)
lightly.
5. Adjust the cup (1) or the stick holder (2) and tighten the
bolt (9).
One-Hand Controls
Intended Application
For stroke patients or hemiplegics.
Features
Two independent braking systems with separate brake levers
are mounted to a single handlebar end, making it possible to
2
steer and brake using a single hand. German law requires two
independent braking systems.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis