For Your Safety - Dorma ES 200 Easy Montageanleitung

DORMA

1. For your safety

This documentation contains important information
regarding the mounting and the safe operation of the door
system.
Please read these instructions carefully before using the
, the ES 200 or the ES 200-2D.
ES 200
It is important for your personal safety to abide by all
enclosed instructions.
An incorrectly performed installation might cause serious
injuries.
Using control elements, making adjustments or performing
procedures that are not described in this documentation
might cause electric shocks, danger caused by electric
voltage/current and/or danger due to mechanical incidents.
Please keep these documents for further reference and hand
them over to the person in charge in case the system is
transferred to another party.
Explanation of symbols
WARNING
Intended application
The ES 200 is only designed to open and close interior
sliding doors with an admissible door panel weight up to
1 x 100 kg or 2 x 85 kg.
The ES 200 is neither suitable for application in
escape routes, nor at fire doors (fire and smoke doors) nor at
exterior doors.
The ES 200 is only designed to open and close interior
sliding doors with an admissible door panel weight up to
1 x 200 kg or 2 x 160 kg.
The ES 200 is neither suitable for application in escape
routes, nor at fire doors (fire and smoke doors) nor at
exterior doors.
ES 200-2D is only designed to open and close interior
sliding doors with an admissible door panel weight up to
1x 150 kg or 2 x 130 kg.
The ES 200-2D is suitable for application in escape route.
The ES 200-2D is neither suitable for application at fire
doors (fire and smoke doors) nor at exterior doors.
The maximum cable length for external components must
not exceed 30 m.
Limitation of liability
The ES 200 , the ES 200 and the ES 200-2D may only
be used according to its specified intended application. The
DORMA GmnH + Co. KG will not accept any liability for
damage resulting from unauthorised modifications of the
, the ES 200 and the ES 200-2D.
ES 200
Furthermore components/accessories that have not been
approved by DORMA are exempted from liability.
Safety instructions
Work on electrical equipment may only be performed
by properly qualified staff (electricians).
Do not allow children to play with the ES 200
the ES 200, the ES 200-2D or its adjustment and
control devices.
Keep remote controls out of reach of children.
Never stick metal objects into the openings of the
ES 200
otherwise you might sustain an electric shock.
If the ES 200
mounted onto a metal door leaf, you have to earth
(ground) the door leaf properly.
Glass door leaves have to be made of safety glass.
6
ES 200 Easy
ES 200
ES 200-2D
This symbol underlines important
information that may facilitate your work.
It warns you of possible system damage
and explains how to avoid this damage.
It indicates dangers that might cause
personal or material damage or even kill
people.
, the ES 200 or the ES 200-2D;
, the ES 200 or the ES 200-2D are
Important technical data
ES 200 , ES 200 ES 200-2D
Power supply
Fuse (by others)
Operating noise
Admissible humidity
admissible temperature:
Standards, laws, codes and regulations
The latest versions of the common and country-
specific standards, laws, codes and regulations have to
be observed.
DIN 18650 (German Industrial Standard)
During the planning of the door system, the manufacturer
(the person installing the system) and the
commissioner/facility operator have to perform an individual
risk assessment (together).
Please refer to our homepage
the provided "risk assessment form" under PRODUCT for
further assistance when performing your individual risk
assessment.
Danger spots at closing edges
Automatic doors might cause hazards by crushing,
shearing, hitting and drawing-in at the different
closing edges.
Secondary
closing edge
Residual risk
Depending on the structural conditions, the prevailing door
version and the available safety equipment, residual risks
such as crushing and hitting (with a limited force) cannot be
excluded.
,
230 V
16 A
< 70 dB(A)
93% relative humidity
non condensing
-20°C - +60°C
www.dorma.com and consider
Main
closing edge