Dorma ES 200 Easy Montageanleitung Seite 41

DORMA
Fixing instruction
Drawing and text with designation e.g.
belong to wall fixing
Drawing and text with designation e.g.
belong to corridor fixing
Drawing and text with designation e.g.
are fixing variants
Before Fixing
Work on electrical equipment may only be
performed by properly qualified electricians.
Power supply (on site) with 16 A fuse protection.
Connecting cable must be double insulated, for
example: NYM. Do not use flat webbed house
wires.
The instructions accompanying the accessories
1A 1A 1A 1A
must be observed.
2A
Wall fixing: Direct wall installation
3A
Main dimensions and formulas
4A
Preparing of colour-/length-dependent
5A
components
Corridor installation with aluminium girder
1B
Main dimensions and formulas
2B
3B
4B
Preparing of the colour and extrusion
5B
components
Sketches and main dimensions
6a
Single-leaf door "right-opening"
6b
Single-leaf door "left-opening"
6c
Double-leaf door
7A
Prepare mounting and aluminium girder for cable
7B
of light barrier.
ES 200 Easy
ES 200
ES 200-2D
1A
1B
1c
Fixing the track rail:
8a
8b
Assemble the roller carriers and fix them.
9a
9b
9c
9d
Installation of Mini Drive Unit and pulley
(locking device)
ES 200 Easy
10a
10b
ES 200 / ES 200-2D
10c
- Fix and adjust Mini Drive unit
11a
ES 200 Easy
11b
ES 200 / ES 200-2D
11c
- screw down pulley (locking device).
12a
12b
Install toothed belt, cover holder and accessories.
13
14
15
Trimming the toothed belt
Trim and secure the toothed belt manually.
16
Tighten screw of clamping device until bolt head
17
and end of cover are aligned.
Screw down pulley (locking device) tight.
18
Adjustment of locking device (optional)
19 Close sliding panels
Unscrew cage
20
Insert lock bolt,
21
Adjust cage and
22
Secure cage.
23
Insert cable loops into ES 200 profile.
24
41