Dorma ES 200 Easy Montageanleitung Seite 3

DORMA
Contents
1. Zu Ihrer Sicherheit
2. For your safety
3.
Symbols of the headline
Befor fixing
4. Assembly of components
- Main characteristics / Explanation of symbols
- Overview of system components
- Preparation for wall fixing:
- Preparation for corridor fixing:
- Main dimensions
- Preparation of the profiles for the wiring of the light barriers
- Installation of track rail and rubber strip
- Assembly and installation of carrier unit
- Installation of the Mini-Drive-Unit and pulley / locking device
- Installation of toothed belt, cover holder and accessories
- Tensing the toothed belt
- Adjustment of closing edge
- Adjustment of locking device (optional)
- Preparation of inner cover
- Installation of cable loop and toothed belt adjustment
- Trim and fix end plates
- Installation and fitting of inner cover
6. Fixing Instructions Drawings
- Wall fixing: Installation of operator profile
- Corridor fixing: Installation of operator profile
- Installation of side screen (corridor fixing) and floor guide
- Installation of light barrier cable
- Installing of light barrier and their profiles
- Installation of sliding panels
- Adjustment of sliding panels and derailment guard
- Adjustment of end stops and opening width
- Adjustment of closing edge
6. Fixing instruction text German
7. Fixing instruction text English
„Translation of the original documentation„
ES 200 Easy
ES 200
ES 200-2D
255169-01-6-50
- dimensions & formulas
- preparation of profiles
- dimensions & formulas
- preparation of profiles
08-2012
Seite
Page
04 - 05
06 - 07
08
08
09
10
11 - 12
13
14 - 15
16
17
18 - 19
20
21
22
23
24
25
26
26
27
27
28
29
30
31
32
33
33
34
35
36
37 - 40
41 - 44
3