Maintenance - Qlima H 408 Gebrauchsanweisung

5. MAINTENANCE

G
WARNING
Before clean and maintain this machine, do turn it off and pull out the plug.
Make sure machine is powered off to avoid electric shock;
A. CLEAN OSCILLATING PLATE
1 Take out water tank of humidifier.
2 Pour out residual water in the water sink
3 Use clean brush to clean oscillating plate. Do not use household cleaners to clean
oscillating plate which will affect its lifetime. Do not suggest expose humidifier under
candle/ lampblack, fireplace ash and smoke.
G
ATTENTION
Do wear gloves when clean oscillating plate to avoid hand scald by hot water in
water sink.
B. CLEAN OUTER APPEARANCE OF HUMIDIFIER
1 Power off and pull out the plug
2 Dip a little soap water by towel to clean outer appearance of humidifier
3 Do not make water flow into inside of machine. It may cause damage on your
machine and electric shock.
4 After cleaning, place this machine in ventilating place to make it dry (do not expose
to sun). Only when machine is completely dry can you use it.
6. FAULTS
Common problems
Machine doesn't work
Bad mist effect
4
32
Failure analysis
1.Power switch is not on
2.Forget to plug the power
3.Water shortage
4.Floating ball has failure
1.Mist outlet is blocked
2. Water level in water sink is
too high
Solutions
1.Open switch button
2. Check whether power is
connected
3.Fill water
4. Check if floating ball is as-
sembled in proper place
1. Check and make sure mist
outlet is not blocked
2. Empty the water tank and
the basin and refill tank
with cool tap water