Connecting The Suction Tube; Operation; Sucking In - OBI CMI 465204 Gebrauchsanweisung

465204_oelpumpenset.book Seite 26 Montag, 14. Dezember 2009 2:29 14

Operation

GB

Connecting the suction tube

– Insert the wider end of the suction tube (3) into
the pump nozzle (5).
Operation

Sucking in

– Push the connected suction tube (3) into the
fluid to be pumped.
– Hold the container (6) of the oil pump lower
than the fluid to be pumped.
– Pull the lever (1) upwards. Repeat the proce-
dure if necessary.
This causes the fluid to be sucked in. Due to the
inclination, the fluid automatically flows into the
container after being briefly sucked in.
465204 - V_01/12/2009 26
1
3
465204 - V_01/12/2009
3
5
4
6