Dräger X-plore 6000 Gebrauchsanweisung Seite 211

6 Storage
Loosen the straps of the head harness as far as possible.

Wipe the visor with an antistatic cloth.

Make sure that the facepiece is dry.

Pack the facepiece in its bag or storage box.

Store the facepiece in a dry, dust-free place where it will not be deformed.

Keep the facepiece out of direct sunlight and heat.

Storage temperature: 5 °F to 77 °F (-15 °C to +25 °C).

Maximum storage temperature temporarily: 140 °F (+60 °C)
Observe ISO 2230 and national guidelines for storage, mainte-

nance and cleaning of rubber products.
Dräger rubber products are treated with an agent to protect against
premature aging which in some cases is visible as a gray-white
coating. This coating can be washed off with a brush and soapy water.
7 Disposal
Dispose of the facepiece and used canisters according to local waste
disposal regulations.
8 Order list
Designation and description
X-plore 6300 - EPDM - PMMA - RA - K/bl
X-plore 6530 - EPDM - PC - RA - K/bl
X-plore 6530 - EPDM - PC - RA
X-plore 6570 - Si/bl - PC - RA - K/sw
X-plore 6570 - Si - PC - RA
Dräger X-plore 6000
Designation and description
Accessories
Spectacle kit (spectacle frame and clamping device) R 51 548
Spectacle kit PNova Trispec
Mask box (Mabox) (for facepiece + 1 filter)
Mask box (Mabox II) (for facepiece)
Mask box (Wikov V) (for facepiece)
Welder's protective visor
Sealing ring lifter
Pliers
Spanner
Cleaning and disinfecting agents
1008 GREEN LIQUID HAND DISH WASH
800 SPUR-TEX Disinfectant
NEUTRAL DISINFECTANT CLEANER
klar-pilot FLUID SUPER PLUS
Test equipment
Dräger Quaestor 5000
Order No.
Test adapter
R 55 800
Exhalation valve plug
R 55 795
Portacount Fit Test Adaptor
R 51 525
Quantifit OHD Fit Test Adaptor
R 55 790
R 51 535
(Use Instructions for NIOSH-approved full facepieces)
Storage
Order No.
40 57 622
R 53 680
R 54 610
R 51 019
40 53 437
40 54 983
R 53 239
R 26 817
on request
on request
on request
R 52 560
R 58 316
R 53 344
R 53 349
40 56 315
40 56 718
211