Declaration Of Conformity - Herth+Buss Quicky 90A Anleitung

Declaration of conformity

14. Declaration of conformity
We,
Herth+Buss Fahrzeugteile GmbH & Co.KG
Dieselstraße 2 – 4
D-63150 Heusenstamm
certify that the battery charger Quicky 90A
complies with the following standards:
IEC 60335-1:2010 (fifth version)/EN 60335-
1:2012 + A11:2014; IEC 60335-2-29:2002
(fourth version) + A1:2004 + A2:2009 /
EN 60335-2-29:2004 + A2:2010; EN 62233:2008
and therefore conforms with the protection
requirements relating to safety and electro-
magnetic compatibility.
The year in which the CE marking was affixed
is "2014" . Manufacturer:
Holger Drewing Holger Drewing
Managing Partner Managing Partner
www.herthundbuss.com
Holger Drewing
Managing Partner
Dipl.-Wirtschafts.-Ing.
August 15, 2014
Hereby declares that the battery charger
Quicky 90A is compliant to the DIRECTIVE
2002 / 95 / EC (RoHS Directive), as well as DI-
RECTIVE 2011/65/EU (RoHS Recast), on the
restriction of the use of certain hazardous
substances in electrical and electronic
equipment while:
The parts do not exceed the maximum con-
centrations of 0.1% by weight in homoge-
nous materials for lead, mercury, hexava-
lent chromium, polybrominated biphenyls
(PBB) and polybrominated diphenyl ethers
(PBDE), and 0.01 % for cadmium, as required
in Commission Decision 2005/618/EC of
18 August 2005.
August 15, 2014
Holger Drewing Holger Drewing
Managing Partner Managing Partner
Herth+Buss Fahrzeugteile GmbH & Co.KG
August 15, 2014 | Heusenstamm
95950003
222