HEIDENHAIN ND 2100G GAGE-CHEK Installationsanleitung Seite 18

Installation Instructions en
5 Specifications
Device
Housing Die-cast metal enclosure
Type of mounting
Mounting stand
Mounting adapter
Dimensions
Unit: 287 mm x 195 mm x 93.5 mm
Unit with mounting stand: 287 mm
x 214 mm x 220.5 mm
Unit with mounting adapter:
287 mm x 203.5 mm x 107 mm
Display
Visual display unit
Color LCD 5.7" (14.5 cm)
0.50" (12.7 mm) display digit size
Display step Selectable,
min. 0.000004" (0.00001 mm)
Electrical data
Power supply
100 V to 240 V AC (–15 % to +10 %)
47 Hz to 63 Hz
Max. 100 W
Line fuse Slow blow 1.6 A, 250 V AC; 5 mm x
20 mm; quantity: 2
Measuring device 4 or 8
interfaces
1 Vpp interpola- 10-fold
tion
Switching inputs 5 TTL inputs (freely definable),
5 V DC (±10 %)
Switching outputs
12 TTL outputs (freely definable,
5 V DC (±10 %), max. current
24 mA)
2 relay outputs
Other
Foot-switch connector (2 functions)
connections
or remote keypad, RJ-45 connector
Audio output, 3.5 mm speaker jack,
min. impedance 8 Ω
Datainterface
RS-232-C/V24
USB 2.0 (Type A, Full Speed)
20
Max. switching voltage 30 V DC
Max. switching current 0.25 A
Max. continuous current 0.5 A
Max. switching capacity 3.0 W
Ambient conditions
Operating tem- 0 °C to 45 °C
perature
Storage tempera- –20 °C to 70 °C
ture
≤ 80 %
Relative air hu-
midity
≤ 2000 m
Altitude
General information
Directives
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Pollution degree II
Protection IP 40
EN 60529
Weight
With mounting stand: approx. 4.8 kg
With mounting adapter: approx. 2 kg
Dimensions
See dimension drawings in the Appendix.
All dimensions are in millimeters [mm].
ND 2100G GAGE-CHEK