Installation Instructions - HEIDENHAIN ND 2100G GAGE-CHEK Installationsanleitung

ND 2100G GAGE-CHEK
1 About these instructions
These instructions provide all the information and safety
precautions needed for the proper mounting and installation
of the product.
1.1 Information on the model
Product designation
ND 2100G GAGE-CHEK
ID label
The ID label is provided on the back of the ND.
Example:
1
3
ND xxxx QUADRA-CHEK
ID 123456-xx xx
SN 12 345 678 x
www.heidenhain.de
1 Product designation
2 Index
3 ID number
Validity of the documentation
A document number is provided at the bottom
left on the last page of the documentation. The
documentation is valid if the document number
matches the document number given under
www.heidenhain.de.
For this purpose, you need to compare
the product designation, the ID number
and the index given on the ID label with
the corresponding details provided under
www.heidenhain.de.
1.2 Notes on reading the documentation
The table below lists the components of the documentation
in the order of priority for reading.
WARNING
Failure to comply with the documentation may result in
fatal accidents, personal injury or damage to equipment.
Please read the documentation carefully from
beginning to end and keep it for future reference.
Documentation Description
Addendum An addendum supplements or su-
persedes the corresponding con-
tents of the Operating Instructions
and, if applicable, of the Installa-
tion Instructions. If this document
is included in delivery, read it first
before you proceed. All other con-
tents of the documentation retain
their validity.
ID number
665 408-xx
2
Documentation Description
Installation Instruc- The Installation Instructions con-
tions tain all the information and safety
precautions needed for the prop-
er mounting and installation of the
product. They are an excerpt from
the Operating Instructions and are
included in every delivery. This
document has the second highest
priority for reading.
Operating Instruc- The Operating Instructions contain
tions all the information and safety pre-
cautions needed for the proper op-
eration of the product according to
its intended use. It is not included
in delivery and has the third high-
est priority for reading. It must be
downloaded from the following ad-
dress and printed prior to commis-
sioning the product:
hain.de
Documentation of These documents are not included
connected measur- in delivery. They are included with
ing devices and oth- the respective measuring devices
er peripherals and peripherals
1.3 Storage and distribution of the
documentation
These instructions must be kept in the immediate vicinity of
the workplace and must be available to all personnel at all
times. The operating company must inform the personnel
where these instructions are kept. If the instructions have
become illegible, the operating company must obtain a new
copy from the manufacturer.
If the product is handed over or sold to a third party, the
following documents must be given to the new owner:
Addendum, if supplied

Installation Instructions

Operating Instructions
1.4 Target group for the instructions
The Installation Instructions must be read and observed by
every person who performs any of the following tasks:
Mounting
Installation
Installation Instructions en
www.heiden-
13