Installation; Power Cord - Klarstein Glacial Handbuch

EN
22

INSTALLATION

Note: The device must be installed by a competent person in accordance with the
operating instructions. Incorrect installation may result in property damage and/or
personal injury.
• Keep the ice maker in an even location and the power cord can be plugged
directly into the socket.
Water supply and drainage connection
Note: In regions with high calcareous water content, we recommend the use of a
water filter to maintain the functionality of the appliance. Replace it regularly.
• Usually, there is equipped with a water inlet pipe and a corrugated drain pipe
as a standard configuration in the unit. The standard configuration of the machine
installation and connection diagram is as follows:
Connect to drain pipe
Connect water pipe

Power cord