BEARWARE 302547 Bedienungsanleitung Seite 75

Low battery:
If the battery symbol appears, then the inserted batteries are empty and should
be replaced with new batteries as soon as possible. This applies to the outdoor
The outdoor temperature is measured by the outdoor sensor and shown to an
accuracy of one tenth of a degree. The configured temperature unit is displayed
to the right of the reading. The temperature unit can be changed between ° C and
Channel display
The weather station receives the signal of the outdoor sensor
automatically after all settings have been configured. You can
switch between the different channels using the "CH" button.
The channels of the outdoor sensor can be selected on the
device directly using a toggle switch.
1, 2, 3: Outdoor sensor channel
: Automatic channel change
English
sensor as well as to the base station.
Outdoor temperature display:
° F. To do this, press the °C / °F button on the
back of the weather station.
If the reading is less than the minimum value
(-20°C / -4°F), the display shows "LL.L". If the
value is more than the maximum value are
(50°C / 122°F), the display shows "HH.H".
75