Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short-circuit, burns, electric shock, etc.
INSTALLATION
Mounting
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
Before rigging make sure that the installation area can hold a minimum point load of 10 times the device's
weight.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.
Operation
Connect the connection cable of the power-unit with the DC IN-socket. Plug the power-unit into your outlet.
With the POWER-switch, you can switch the device on and off.
You may now set the desired digits on the Countdown Board via the 3 buttons on the side of the device.
Set Up Button:
1 x press = set the digits for the day
2 x press = set the digits for the hour
3 x press = set the digits for the minutes
4 x press = set the digits for the seconds
+ Button:
This button increases the digits respectively by 1
- Button:
This button decreases the digits respectively by 1
The Countdown Board begins with the countdown 3 seconds after the last press of the Set Up button.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
9/10
00041526.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
