Use And Operation; Producer - capital sports 10032205 Handbuch

EN
26

USE AND OPERATION

Connection of electrical power
• The electrical power
should be connected
first. Connect the
electric power cord
to the electrical
power connection
portion
• on the rear of the
main body. *Beep* is
a normal connection
sound.
BT Connection
Users should connect to BT for interaction of the bike and smart devices.
Please refer to the following steps and connect to BT:

PRODUCER

Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
1 Hold the device to be used
(smart phone, pad, etc.) on the
holder.
2 BT can be connected when you
3 push the START button on
the main screen (or BT mark
of upper end). Automatically
access to the nearest bike.
(Please check the power supply
when you cannot access to the
bike for a long time)
4 When the device is connected,
the BT mark becomes in a
connection state (white)
with *Bleep*, and the device
connection phrase appears.