Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
column 02
Connecting the loudspeakers
Important
Before cabling disconnect your
hi-fi system (amplifier, receiver,
power amplifier etc.) from the
mains !
Connect
the
outputs A or B on the back of
your
amplifier
corresponding terminal screws
on
the
speakers,
loudspeaker cables with bared
ends.
Watch
connect the positive pole of
your amplifier to the positive
pole of your Ioudspeaker.
loudspeaker
to
the
using
the
polarity:
Cable Length & Cross Section
Revox
loudspeakers
consistent electrical phase and
impedance characteristics and
are an uncritical load for the
power
amplifier
loudspeaker cables.
Your specialist dealer offers
loudspeaker cables in diverse
styles and with various cross
sections. He will be glad to
advise you according to your
individual needs.
In order to keep cable loss as
low as possible, we suggest the
following cable cross section
dimensioning scheme:
Cable length
up to 5m / 16ft: 1.5 mm
up to 10m / 33ft: 2.5 mm
over 10m / 33ft: 4.0 mm
We advise against using long
cables (more than 20 m / 65
feet) because of inevitable loss.
11
Re:sound S
have
and
the
Dimension
2
/ AWG15
2
/ AWG13
2
/ AWG11
Werbung
Inhaltsverzeichnis
