Connecting The Loudspeakers; Cable Length & Cross Section - Revox Column G70 Bedienungsanleitung

Column / Elegance / Prestige

Connecting the loudspeakers

Important
Before cabling disconnect your
hi-fi system (amplifier, receiver,
power amplifier etc.) from the
mains!
Connect the loudspeaker outputs A
or B on the back of your amplifier to
the corresponding terminal screws
on the speakers, using loudspeaker
cables with bared ends. Watch the
polarity:
amplifier -
amplifier -
Please note:
If one or even more speakers are
connected with the wrong polarity,
there is a significant reduction in
the bass reproduction and the
sound portrait is uneven and
diffused.
Ioudspeaker
Ioudspeaker
Cable Length & Cross Section
Revox loudspeakers
consistent electrical phase and
impedance characteristics and are
an uncritical load for the power
amplifier and
cables.
Your specialist
loudspeaker cables in diverse styles
and with various cross sections. He
will be glad to advise you according
to your individual needs.
In order to keep cable loss as low
as possible,
following cable
dimensioning scheme:
Cable length
up to 5m / 16ft:
up to 10m / 33ft:
over 10m / 33ft:
We advise against using long
cables (more than 20 m / 65 feet)
because of inevitable loss.
10
have
the loudspeaker
dealer offers
we suggest the
cross section
Dimension
2
1.5 mm / AWG15
2
2.5 mm / AWG13
2
4.0 mm / AWG11