Silvercrest SDRF 10 A Bedienungs- Und Sicherheitshinweise Seite 60

Press the button
product for the first time it will automatically scan for DAB+ stations
after being switched on. The progress bar in the colour LCD
dicates the progress of the DAB+ station scan. The number above
the progress bar indicates how many DAB+ stations have been found.
After the DAB+ station scan has completed, the product will select
the first available DAB+ station and start playing it. By default, the
DAB+ stations are listed in numerical and alphabetic order.
Press the button
colour LCD
the alarm settings for alarm 1
Set the main switch
"Off" to switch the product all the way off.
Note: When the power supply
uses a small amount of electricity, even if the product is not connected
to the power supply
Switching on / off when battery powered:
Fully extend the antenna
Set the main switch
Then press the button
product for the first time it will automatically scan for DAB+ stations
after being switched on. After the DAB+ station scan has completed,
the product will select the first available DAB+ station and start
playing it. By default, the DAB+ stations are listed in numerical
and alphabetic order.
Press the button
Set the main switch
to switch the product all the way off.
60 GB/IE
to switch on the product. When using the
8
to set the product to standby mode. The
8
shows the current date and time
1
at the back of the product to position
5
19
or is switched off.
19
for good reception.
7
at the back of the product to position "On".
5
to switch the product on. When using the
8
to switch the product off.
8
at the back of the product to position "Off"
5
and alarm 2
1g
is plugged into a mains socket it
in-
1
, as well as
1b
.
1f