Operation; Adjusting The Volume; Dab+ Station Scan - Silvercrest SDRF 10 A Bedienungs- Und Sicherheitshinweise

To return to playback mode, press the Menu / Info button
the product is in playback mode again. If no button is pressed after
the last entry, the product automatically returns to playback mode
after approx. 30 seconds.

Operation

Note: The reception range specified reflects the technical abilities of
this appliance. Information received outside of this range must not be
used for gain or disclosed. Observe the laws of the respective country.

Adjusting the volume

Turn the volume control
Turn the volume control (Volume)
volume.

DAB+ station scan

We recommend regularly repeating the DAB+ station scan to be able
to save current DAB+ stations to the station list of the product. This
particularly applies when changing locations, e.g. after moving or on
holiday. You can scan for DAB+ stations automatically or manually.
Automatic DAB+ station scan:
Verify the product is in DAB+ mode (see chapter "Switching radio
modes"). In this mode the colour LCD
Press the Scan button
product will automatically scan for all available DAB+ stations.
The progress bar in the colour LCD
the DAB+ station scan. The number above the progress bar indi-
cates how many DAB+ stations have been found.
68 GB/IE
clockwise to increase the volume.
13
anti-clockwise to lower the
13
will read "Digital Radio".
1
for automatic DAB+ station scan. The
9
indicates the progress of
1
until
10