Ec Declaration Of Conformity - Makita DUR365U Bedienungsanleitung

The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Danger; be aware of thrown objects.
･
The distance between the tool and
bystanders must be at least 15 m.
･
Keep bystanders away.
･
Keep distance at least 15 m.
15m(50 )
FT
･
Avoid kickback.
･
Wear a helmet, goggles and ear
protection.
･
Wear protective gloves.
･
Wear sturdy boots with nonslip soles.
Steeltoed
recommended.
･
Do not expose to moisture.
･
Top permissible tool speed.
･
Top permissible tool speed.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
ENG901-1
END119-1
safety boots are
of the European
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):
Designation of Machine:
Cordless Grass Trimmer
Model No./ Type: DUR365U
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN/ISO11806, EN60335
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
With metal blade
Measured sound power level 86 dB (A)
Guaranteed sound power level 86 dB (A)
Plastic blade
Measured sound power level 92.8 dB (A)
Guaranteed sound power level 93 dB (A)
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
90431 Nürnberg, Germany
Identification number 0197
With nylon cutting head
Measured sound power level 90 dB (A)
Guaranteed sound power level 92 dB (A)
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
6
and returned
16.1.2015
Yasushi Fukaya
Director
to an
ENH114-1
ENH115-1
ENH115-1