Safety Notes; Technical Data - Grohe Blue Starter Kit Technische Produktinformation

GB
Fold out pages:
Please pass this Technical Product Information
and the user manual for the filter cartridge on to
the kitchen fitting user.
Delivery specification
(see fold-out page I)
– Kitchen fitting (1)
– Wall holder (2)
– Filter head (3)
– Filter cartridge (4)
– User manual for filter cartridge (5)
– Escutcheon (6)
– Connection tube (7)
– Bag with installation materials (8)
– Control unit (9)
– Glass decanter (10)
– Technical Product Information (TPI) (11)
Tools required:
Open-end spanner, socket spanner, Allen key,
screwdriver, possibly also drill (depending on
substrate).
Screws and plugs are not included.
Applications
The kitchen fitting supplies filtered GROHE Blue
water in addition to hot and cold tap water. Filtered
and unfiltered water flows into the GROHE Blue
kitchen fitting through two separate pipes and
through two separate areas of the mousseur.
The filter cartridge reduces the water hardness of
®
the GROHE Blue water as a function of the
hardness of the tap water. The proportion of
unsoftened water can be set using the integrated
bypass. Furthermore the cartridge binds heavy
metal ions such as lead, copper and cadmium.
It also reduces cloudiness as well as organic and
taste-impairing constituents and chlorine residues.
The filter head is fitted with a type-tested
non-return valve.
The water filtrate is classified as Category 2
per EN 1717.
The filter fitting can be operated in conjunction with:
– pressurised storage heaters,
– thermally controlled instantaneous heaters,
– hydraulically controlled instantaneous heaters,
Operation with unpressurised storage heaters is
not possible.

Safety notes

• Avoid dangers resulting from damaged power
cords. If damaged, the control unit must be
replaced.
• The plug-in connectors for the control unit must
not be directly or indirectly sprayed with water
when cleaning.
• The fitting must be connected to a permanent
power supply with a dedicated power switch.
• For hygiene reasons, the filter system must be
flushed before using for the first time. It is only
permitted to operate the filter system with cold
water of fooodstuff grade.
• At the installation location the filter system must
be protected from mechanical damage and heat
(e.g. from sunlight). Do not install near heat
sources or an open fire.

Technical data

• Flow pressure:
• Operating pressure
– Fitting:
– Filter cartridge and filter head:
• Test pressure of fitting:
A pressure-reducing valve must be fitted if static
pressures exceed 5 bar.
Avoid major pressure differences between the hot
®
and cold water supply.
• Flow rate at 3 bar flow pressure
®
– Fitting (tap water):
– Filter cartridge
(GROHE Blue
• Ambient temperature:
• Temperature
– Hot water supply:
– Recommended (energy saving):
• Voltage supply:
• Power consumption:
• Type of protection
– Control unit:
– Mains plug:
• Adjustable bypass, factory setting:
• Filter capacity:
• Water connection:
min. 1 bar/recommended 2 – 5 bar
®
water):
100 - 240 V AC,
or max. 6 months
max. 8.6 bar
2 – 8.6 bar
16 bar
approx. 9 l/min
approx. 4 l/min
4 – 30 °C
max. 70 °C
60 °C
50/60 Hz
9 W
IP 65
IP 40
30 %
max. 500 litres
cold – blue
hot – red
5