Accessing The Total Values; Total Distance - VDO M5 Bedienungsanleitung

M5

Accessing the total values

The total values for the distance travelled, the ride time
and the altitude data are accessed separately to the data
for the CURRENT trip.
There are two options for displaying the totals.
OPTION 1:
Access the totals by pressing the TPC (TOTAL/PULSE/
CAD) button.

Total distance 1

(Cumulative value for all trips on bike 1)
The total distance counts up to 99,999 km or miles.
If this value is exceeded, the total distance counter restarts at
zero.
If the unit is switched from miles to km and the conversion
result is greater than 100,000 km, the counter is reset to
zero.
Now press theTPC (TOTAL/PULSE/CAD) button to scroll to
total ride time
the
(Cumulative value for all trips)
The total ride time counts up to 9999:59 HHHH:MM. If
this value is exceeded, the total ride time count restarts at
zero.
If you have also used bike 2, the values for
bike 2 are also displayed here.
Press the TPC (TOTAL/PULSE/CAD) button to scroll to the
other values for bike 2.
You can also access the total values (cumulative data for
bike 1 and bike 2).
11