1. General information / 2. Short overview
1. General information
The temperature dry-well calibrator described in
■
the operating instructions has been designed and
EN
manufactured using state-of-the-art technology.
All components are subject to stringent quality and
environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information
■
on handling the instrument. Working safely requires that all
safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations
■
and general safety regulations for the instrument's range
of use.
The operating instructions are part of the product and
■
must be kept in the immediate vicinity of the instrument
and readily accessible to skilled personnel at any time.
Pass the operating instructions onto the next operator or
owner of the instrument.
Skilled personnel must have carefully read and
■
understood the operating instructions prior to beginning
any work.
2. Short overview
2.1 Overview
3
2
4
The general terms and conditions contained in the sales
■
documentation shall apply.
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried
■
out in accordance with international standards.
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
Temperature block
1
1
Controller
2
Handle
3
2.2 Description
The temperature dry-well calibrator is a portable unit, for
service functions and also for industrial and laboratory
tasks. The temperature dry-well calibrator is provided for
the calibration of thermometers, temperature switches/
thermostats, resistance thermometers and thermocouples.
WIKA operating instructions, model CTD9100-1100
www.wika.de / www.wika.com
CT 41.29
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de