Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION - Preparation
Installation in the Revox fitted housing - option
In the case of a new-build, we
recommend the use of the
corresponding, watertight fitted
housing from Revox. This is either
fitted in the wall at the building
shell phase or fixed to the
boarding when sealing the walls or
ceiling.
The build-in housing from Revox
includes all the required parts:
1 x Wooden build-in housing
1 x Sound-proofing material
1 x Hinged cover
Inceiling 50 fitted housing
Part no.: 1.084.480.00
290 mm / 11.5 inch
250 mm / 9.85 inch
250 mm / 9.85 inch
Sealing the fitted housing
The fitted housing is fixed to the
boarding with 4 nails at the pre-
drilled positions.
Flush mounting the fitted
housing
If the fitted housing is to be flush
mounted in a brick wall, you must
ensure that the plaster coating
that is added later, is flush with
the housing.
Inceiling 80 fitted housing
Part no.: 1.084.485.00
450 mm / 17.8 inch
410 mm / 16.2 inch
410 mm / 16.2 inch
6
Werbung
Kapitel
Inhaltsverzeichnis
