Introduction; Unpacking; General - Revox Re:sound I series Handbuch

INTRODUCTION

Dear Customer and Music Fan
Congratulation on the purchase
of your new Revox fitted speakers.
We are grateful for the trust that
you have shown in our company
through your choice of these high
quality products.
Your Revox fitted speakers were
developed based on the latest in
acoustic know-how and were
manufactured with great care.
Before you start to use them, we
would recommend that you read
this manual thoroughly so that
you will be able to get the best
sound results.

Unpacking

Please check that the all parts
are included before you start
installation.
2 x Fitted speakers
2 x Metal grills
2 x Painting templates
1 x Cut-out template
We recommend that you keep
the packaging material in case
you should need it in the future to
transport the speakers.

General

The Re:sound I inceiling 50 / 80
(ICS) and inwall 51 / 80 (IWS)
speakers are designed to be
installed in suspended ceilings or
in wall-cladding. The integrated
rotary tensioner
installation in walls up to 32 mm
thick.
Protective circuit
Both fitted speakers have a
separate protective circuit for the
bass and treble speakers, which
reduces the level of the speaker in
the case of an overload and
reactivates it automatically after a
certain time. The length of time is
dependant on the extend of the
overload.
Suitable fitted
available from Revox if you want
to install in solid ceilings or walls.
You will find further information
about Revox fitted housings on
Page 6.
enables
housings are
2