Scheppach SP900-F Originalbetriebsanleitung Seite 10

Initiation
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you much pleasure and success with your new
scheppach machine.
Note
According to the applicable product liability law the ma-
nufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled workers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
We recommend
that you read through the entire operating instruc-
tions before putting the machine into operation. These
operating instructions are to assist you in getting to
know your machine and utilize its proper applications.
The operating instructions contain important notes
on how you work with the machine safely, expertly,
and economically, and how you can avoid hazards,
save repair costs, reduce downtime and increase the
reliability and service life of the machine. In addition
to the safety requirements contained in these opera-
ting instructions, you must be careful to observe your
country's applicable regulations. The operating instruc-
tions must always be near the machine. Put them in
a plastic folder to protect them from dirt and humidity.
They must be read by every operator before begin-
ning work and observed conscientiously. Only persons
who have been trained in the use of the machine and
have been informed of the various dangers may work
with the machine. The required minimum age must
be observed. In addition to the safety requirements in
these operating instructions and your country's appli-
cable regulations, you should observe the generally
recognized technical rules concerning the operation of
woodworking machines.
GENERAL NOTES
• After unpacking, check all parts for possible damage
caused by transportation. In the event of complaints,
you must contact the distributor without delay. Claims
at a later stage will not be accepted.
• Check that the delivery is complete.
10 GB
• Before handling the device, make yourself familiar
with it by reading the operating instructions.
• For accessories, consumables and spare parts, only
ever use original parts. Spare parts are available from
your stockist.
• Include our item number, the device model and year
of manufacture in your order.
Technical data
Length x width x height
mm
Mains connection
Power rating
Pumping rate max
Delivery head max.
Immersion depth max.
Water temperature max.
Hose connection
Length of mains connec-
tion cable
Protection rating
size of foreign bodie max.
Ø
m Risk of damage to the machine!
The specified size of foreign objects does not ap-
ply to sand or stones but to soft, flexible objects
such as fluff or similar which cannot jam the rotor
inside the pump
Scope of delivery
Submersible Pump
Original operating instructions
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
Device description (Fig. 1)
1. Floating switch
Handle
2.
Mains connection cable with plug
3.
4. Pump casing
Hose adapter for pressure connection
5.
6. Height adjustment for float switch
211 x 161 x 372
230V ~ 50Hz
900 W
15500 l/h
8,5 m
7 m
35°C
1" = 25,4 mm
G1" = 33,3 mm
1¼" = 31,75 mm
G1 ½" = 47,8 mm
10 m
IPX8
35 mm